Directions. Pour oil in a deep fryer or heavy saucepan to reach halfway up the sides of the pan. Heat to 325 degrees F, use a deep fry thermometer to determine this. While the oil is heating, peel the potatoes and push through a French fry cutter to form uniform sticks.
How long do you fry fries at 375?
Remove potatoes from water and dry thoroughly on paper towels. Heat oil in a deep-fryer to 375 degrees F (190 degrees C). Cook potatoes in hot oil until golden, 5 to 6 minutes. Drain on paper towels and season with salt.
How long do you deep fry french fries at 350?
Heat oil again, but this time to 350 degrees F (175 degrees C). Add potatoes and fry a second time until golden brown, 5 to 6 minutes. Remove from the deep-fryer and blot with a paper towel. Sprinkle with salt to serve.
What is the best temperature for deep frying?
Temperature is very important. You’ll need a deep-fry or candy thermometer. Bring the heat up slowly until the oil is between 350 and 375 degrees F — too low and you’ll get greasy food, too high and it’ll burn.
Can you deep fry at 400 degrees?
When you deep fry, you need your oil to get really, really hot—about 350 to 400 degrees Fahrenheit. That means that you need oil that has a high smoke point: usually higher than 400 degrees.
Why should you double fry French fries?
Theory #1: “The first fry gets the outside to create a water tight barrier. That way, when you fry them the second time, they stay moist.” Or, Theory #2: “The first fry cooks them through to the center—if you skipped that step, your fries would brown on the outside, but still be raw in the middle.”
What is the best oil to fry French fries?
Refined peanut oil is the best oil to use for making french fries. You can also use canola or safflower oil. Additionally, restaurant fries are so crispy because, among other things, they use old oil continuously.
Do you have to soak homemade French fries?
Soaking the sliced potatoes is the fundamental first step of making proper french fries. The soaking process removes the troublesome starch on the outside of the potato, which will help the fries achieve the perfect crispness.
Can you deep fry raw potatoes?
For deep fried potatoes, you don’t have to boil the potatoes first. You can deep fry from raw. You will need to add water in the oil (not hot oil) to guarantee the inside cooks before the skin crisp.
How long should you soak potatoes before frying?
Allow them to soak, 2 to 3 hours. (You can also stick them in the fridge and let them soak overnight.) When you’re ready to make the fries, drain off the water and lay the potatoes on 2 baking sheets lined with paper towels. Blot with paper towels to dry them.
How can you tell if oil is 350 degrees?
So here’s a simple technique to help determine when frying oil is at its optimum temperature. Drop a 1″ cube of bread into the hot oil and time how long it takes to turn golden brown. If the bread toasts in 50–60 seconds, the oil is between 350° and 365°—this is the ideal range for most frying jobs.
How can you tell if oil is 350 degrees without a thermometer?
But without a thermometer, how do you know when your oil is ready to go? One way is to drop a kernel of popcorn into the oil. If the popcorn pops, it tells you the oil is between 325 and 350 F, in the right temperature range for frying. The easiest and safest method is to stick the end of a wooden spoon into the oil.
How do you heat oil to 350?
Set your burner on medium and let your pan of oil heat for around 5 to 10 minutes. Put the meat thermometer in the center of the oil to check the temperature. The oil should be between 350 degrees Fahrenheit (177 Celsius) and 400 F (205 C), depending on what you’re cooking.
How do you know when oil is ready for deep-frying?
Place the handle of a wooden spoon in the oil. The oil is ready when bubbles begin to appear around the tip of the handle.
How long does it take a deep fryer to heat up to 350?
Approximately 30 minutes. Be sure the lid is on the fryer to help speed up the process. Use good quality oil with a smoke point of 400°f or higher. Vegetable, corn, canola, soybean, or peanut oils are safe to use.
How much oil do you put in a deep fryer?
Most electric deep-fryers use between 6 and 19 cups of oil; our winner uses slightly under 15 cups. This is more than enough oil for most of our recipes; when deep-frying in a Dutch oven, we typically use 8 to 12 cups. You can use either peanut or vegetable oil; we have no distinct preference in the test kitchen.
Why soak fries in water before cooking?
The soaking, Mr. Nasr said, is the secret to the crisp texture of the fries. It draws out the starch, making them more rigid and less likely to stick together. The cooks fry them twice, first blanching them until slightly limp in peanut oil heated to 325 degrees, and again in 375-degree oil to crisp and brown them.
Why Soak potatoes in cold water for fries?
Soaking potatoes in water helps remove excess starch. Excess starch can inhibit the potatoes from cooking evenly as well as creating a gummy or sticky texture on the outside of your potatoes. Cold water is used because hot water would react with the starch activating it, making it harder to separate from the potatoes.
Why do you put fries in ice water?
Soak the Potatoes
Soaking the sliced potatoes in cold water is one of the main steps to prepare perfect French Fries. The cold water removes the starch present outside the potatoes so that you get perfectly crispy fries.
What oil does McDonald’s use for fries?
The suppliers we work with first peel, cut and blanche the potatoes. They then dry, partially fry and quickly freeze the fries for our restaurants. Once in our kitchens, we cook them in our canola-blend oil so you can have them crispy and hot—just the way you like them.
What oil does McDonald’s use to fry french fries?
Like most fried foods, McDonald’s fries are cooked in vegetable oil. To mimic the chain’s original oil blend, which was mostly beef tallow, the oil is laced with chemical flavoring to replicate that mouthwatering smell.
How do you keep french fries crispy?
Here’s what you do. Heat a few tablespoons of the oil in a nonstick pan over medium heat just until it starts to shimmer. Think about covering the entire bottom of the skillet in oil, erring on the side of using more oil than less. The oil helps to “fry” the French fries a second time and get them extra crispy.
Why do you soak potatoes in milk?
The milk gives them a creamier texture and a little more body and richness.
What does baking soda do to French fries?
We’ve made a few tweaks to the triple-cooking technique: First, we provide an easy way to find the ideal potatoes for frying. Next, we brine the potatoes in a solution that includes glucose and baking soda, which elevate the pH slightly, ensuring a deeper golden-brown crust.
Should you soak potatoes in salt water before frying?
Why use salt water for soaking potatoes? There’s moisture naturally found in potatoes, and moisture is drawn to higher concentrations of salt. (This is a process called osmosis.) So, if you put the potatoes in a salt water bath, that will help draw out some of their moisture, resulting in crispier fries.
How long does fries take to fry?
In a cast iron skillet fitted with a thermometer, or a small fryer, heat the oil until it reaches 275 to 300 degrees F. Remove the potatoes from the water and pat dry. Working in small batches, fry the potatoes until they go from shiny to matte, 3 to 5 minutes (this is also called blanching).
Should you boil potatoes before deep frying?
Before all that, though, the secret is to briefly poach them in boiling water (or “blanch” them) before they go into the hot oil. This ensures that the fries are cooked all the way through before getting crisped up in the fryer.
What potatoes are best for French fries?
What type of potato makes the best french fries, Russets. This mealy potato is high in starch and low in moisture which makes them absolutely delicious for french fries. The russets do not stop there, the high starch content makes for a fluffy baked potato.
What happens if you don’t Soak potatoes before frying?
You will only get crispiness if enough water has left that outer part of your fry. Secondly, the starch in the potato cooks (which we’ve elaborated on in far greater detail here). Upon cooking the starch absorbs water and swells up. The other major process taking place is the Maillard reaction.
Should you rinse potatoes before frying?
First, get the starch off! Rinsing or soaking the potatoes for an hour (or, even better, overnight) will remove some of the starch from the surface and prevent the sugars from browning before the potatoes are cooked.
What does soaking potatoes in vinegar do?
Boiling the potatoes in a salt and vinegar bath allows them to soak up all of that briny flavor before you dry them off and crisp them up in the oven. The result is a soft-in-the-center, crispy-on-the-outside potato that’s loaded with flavor.
How can you tell if oil is 375 without a thermometer?
When the oil has preheated, dip the handle of a wooden spoon or a chopstick into the oil. If the oil starts steadily bubbling, then the oil is hot enough for frying. If the oil bubbles very very vigorously, then the oil is too hot and needs to cool off a touch.
What should your oil temp be?
Normally, you want your engine oil to be between 220-250 degrees Fahrenheit. Past 275 degrees it will start to break down. But the “At Oil Temp” light actually refers to your transmission oil—which should generally stay at or below 200 degrees Fahrenheit.
Is vegetable oil okay for deep frying?
There’s no one oil that’s best for deep-frying, although vegetable, canola, sunflower and rice bran oil are all good, as they can be heated to high temperatures without burning.
How do you heat oil for deep frying?
How to heat oil for deep-frying
- Place a plastic ruler in a large, deep saucepan and add enough oil to reach 10cm up the side of the pan.
- Place over medium-high heat and heat the oil to 180°C. Measure the temperature with an oil thermometer.
- If you don’t have an oil thermometer, drop a cube of bread into the oil.
How do you deep fry?
How to Deep Fry
- Place a deep-fry thermometer in the oil and heat over medium-high heat to 360 degrees F.
- Pat your food dry.
- Carefully lower the battered food into the hot oil and stir gently to separate.
- Remove the food, using a spider or slotted spoon, and transfer to a wire rack set over paper towels.
What is the best oil to use in a deep fryer?
Vegetable oil is the best oil for deep frying. Canola oil and peanut oil are other popular options. While vegetable oil, canola oil, and peanut oil are the most popular oils for deep frying, there are several other oil options you can choose: Grapeseed Oil.
Do you close the lid on a deep fat fryer?
The manufacturer recommends you cook with the lid down. Why would you deep-fry with a lid at all? It creates condensation, which then drips back into the oil and also partially steams the food, which defeats the point of deep-frying.
What do you do with oil after deep-frying?
Once it is completely cool, pour it through a muslin cloth, coffee filter paper or kitchen roll into a glass bottle or jar that can be sealed. Label the jar with the date you used it for deep frying, what you used it for and the best before date. Store your oil in a cool, dark place and use within six weeks.
Can you reuse fry oil?
Yes, it is OK to reuse fry oil. Here’s how to clean and store it: ① Once you’ve finished frying, let the oil cool. When it’s reached a safe temperature, use a utensil to remove any large pieces of batter that might be left over.
Does soaking potatoes in water make them crispier?
The additional step of allowing the peeled, washed and cut potatoes to soak in cold water removes excess potato starch from the outside. This will help with the crisping up of the potatoes when they bake or roast.
What does boiling potatoes in baking soda do?
They suggest adding baking soda (bi-carb soda) to the water you boil your potatoes in to help them go crispy in the oven.
Should you wash potatoes after cutting?
Once it’s time to cook with the potatoes, drain and rinse again with cold water. Washing the potatoes twice with water will remove excess starch, which will help them to get extra crispy when roasted or fried.
How long do you soak potatoes to remove starch?
Soak raw potatoes in a container for up to four hours. The potatoes should be fully submerged to prevent oxidation and discoloration. After four hours, the potatoes should be rinsed with cold water. Chopping, cutting or otherwise slicing the potatoes will excrete more starch.
Should you always soak potatoes?
Eating healthy should still be delicious.
Soaking potatoes in water is the best way to keep prepped potatoes from turning brown.
What does Chick Fil A fry their fries in?
Waffle-cut potatoes cooked in canola oil until crispy outside and tender inside.
What does Wendy’s fry their fries in?
And just like every other large fast-food chain, Wendy’s frying oil is dosed with dimethylpolysiloxane, a silicone-based chemical that helps keep the vegetable oil from getting foamy after countless rounds of frying.
What oil does KFC use?
Most of KFC’s food is cooked in fully refined soybean oil, which the Food & Drug Administration does not count as an allergen.
What temperature does McDonald’s cook their fries?
They are blanched in precisely maintained 170° water for about 15 minutes to allow for a soft interior. The fries are completely dried. They are then quickly fried for the 1st time at 400° F.
What does Burger King fry their fries in?
The fries are cooked in trans fat-free vegetable oil and do not contain animal products, Burger King said. On December 16 Burger King is promoting its new fries by giving away $1 “value” portions for free. The new fries will be available outside the United States in 2012.
Does Mcdonalds soak their fries in sugar?
The now-cut and blanched fries are dipped in an “ingredient bath” which consists of dextrose and sodium acid pyrophosphate.
Why should you double fry French fries?
Theory #1: “The first fry gets the outside to create a water tight barrier. That way, when you fry them the second time, they stay moist.” Or, Theory #2: “The first fry cooks them through to the center—if you skipped that step, your fries would brown on the outside, but still be raw in the middle.”
Why are my french fries not crispy?
For crisp, firm fries, fry twice
Ideally, this is when the surface starch absorbs the last remaining bit of moisture, expands more, and seals the surface for crispness. You do need to have the cooking time for high-starch potatoes just right. If you cook them too long, they’ll run out of internal moisture.
How do restaurants keep fries hot?
Heat Lamps
In order to keep food warmed without damaging its taste and texture, the Crisp N’ Hold circulates a gentle layer of hot air around it that is distributed from the bottom of the grate the food sits on and slotted openings at the top of the unit.